Browse Categories

Waterway Executive 56 Frame Spa Pump, 5HP, 230V

<< Previous in Waterway Executive 56 Next in Waterway Executive 56 >>

: $339.00
Part Number: 3722021-13,3722021-1D
Manufacturer: Waterway Plastics
Manufacturer Part No: 3722021-13, 3722021-1D

* denotes required field

Intake size*
Waterway Executive 56 Spa Pump, 5 HP, 230V
Waterway Executive 56 Frame spa pump wet end
assembled to a 56 frame, 5hp,16.4/4.8A, 2-speed 230V spa motor
Choose intake size :
2 inch intake and 2 inch discharge -Part No. 3722021-1D
2-1/2 inch intake and a  2 inch discharge -Part No. 3722021-13
(2-1/2 inch intake measures 3-1/2 inch and 2 inch intake measures 3 inch- see bottom of this page)

Other Part No. PF-50-2N22C
Features:
  • Executive spa pump wet end designed specifically for 56-frame spa motors
  • Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
  • Two speed spa motors have four sets of insulated windings for increased efficiency
  • 56 frame spa motor for added strength, cooler operating temperature and longer motor life
  • Choose  2 inch or Large 2-1/2 inch intake for improved flow performance and reduced noise
  • Large 6-1/2" diameter wet end for higher head pressure
  • Split capacitor, (start and run) for less energy consumption
  • Thermally protected to extend life expectancy of hot tub motor
  • Highly versatile wet end can be rotated every 90 degrees
  • Viton seals
 
 
How to measure for the Waterway Executive 56 frame Spa Pump

Manufacturer Part No. 3722021-1D


 
Manufacturer Part No. 3722021-13

Related Products

Waterway Barbed Adapter Fitting, 672-4350
: $4.99
Waterway Barbed Adapter Fitting, 672-4350
Waterway Barbed Adapter fitting for Waterway Spa Pump. 672-4350
Waterway Pump Union 400-5670
: $9.00
Waterway Pump Union 400-5670
Man. Part No. 400-5670 2 inch pump union for Hi-flo and 2 inch Executive
Waterway Pump Union 400-6010
: $10.00
Waterway Pump Union 400-6010
Man. Part No. 400-6010 2-1/2 inch pump union for Executive Spa Pumps
Waterway Threaded Buttress Union Adapter, 2" X 2.5"
: $10.00
Waterway Threaded Buttress Union Adapter, 2" X 2.5"
Waterway Plastics threaded buttress union adapter. Manufacturer's Part No. 415-6010 Use to make a 2 inch pump wet end 2.5 inches (measures 3" ID and 3-3/8" OD)
Heater Tailpiece/Pump O-Ring Gasket, 2 inch
: $4.00
Heater Tailpiece/Pump O-Ring Gasket, 2 inch
2 Inch Heater Tailpiece O-Ring Gasket for stainless steel heater manifold. Also used for the 2 inch Waterway Spa Pumps.
Heater Tailpiece/Pump O-Ring Gasket, 2-1/2 inch, 711-6020 Waterway Plastics
: $4.00
Heater Tailpiece/Pump O-Ring Gasket, 2-1/2 inch, 711-6020 Waterway Plastics
2-1/2 Inch Heater Tailpiece O-Ring Gasket for stainless steel heater manifold. Also used for the 2-1/2 inch Waterway Spa Pumps. Use for Waterway Viper and someExecutive pumps with 2-1/2 inch intake.
Products