United Spas CGT7 | Digital Spa Control | Replacement Hot Tub Control | Spa Heater Control Panel C5 Series

United Spas C6 G Digital Spa Control System with T7 Topside control, CG11T7 replaces: C5G,CGT7, CG09T7
For Gas Heater Systems

Learn more about the LED bulb - click here
Learn more about the United Spa Controls on You Tube- Click Here
We can help you customize your spa control. Just email us at Tech@spaquip.com or give us a call (727)944-5525 with any questions.

Standard Features:
- Self-Standing Plastic Control
- Dual Voltage (120V/240V) Operation
- T7 Digital Topside

- Topside Adapter/ Extension Face Plate
- 2 Speed 1st Pump Ready w/Cord included
- 1 Speed 2nd Pump Ready
- Circulation Pump Ready
- 1 Speed Aux Pump (Jet or Air) Ready
- Spa Light Ready w/Cord 12V
- Ozone Ready
- Connection to Power Gas Heater's Pilot

ETL Listed (USA & Canada - File: 119733)

UL STD 1563 - 5th Edition CSA C22.2 NO. 218.1

Dimensions:
- 11"H X 14.5"W X 3"D (without white heater tail pieces)
- 7.50 lbs. (without topside/cable)

- Mounting Hole Dimensions 13.25" X 2.63"

- T7 Topside Dimensions: 5" x 2.5"

- Adapter Face Plate Dimensions: 8-1/4" x 3-3/8"
- The included T7 Topside requires a 1.75" hole saw to install

* Transformer is factory set to 240V incoming power, but can be easily converted to 120V (See C6 Installation Manual).

When installing you simply need to program the topside to operate the components in your customer's spa!

NOTE: These units come standard with the cords for the light and a two speed primary pump, if additional AMP cords are needed please check out the 'Cords and Receptacles' section of the store. If you order them above with the spa control you will save a couple of dollars.

With the addition of the new dual-voltage transformers, the C6 control series are now the only controls on the market that come out of the box ready to operate at 120V or 240V (3-wire or 4-wire), at 50Hz or 60Hz, and configurable to 40 different hardware configurations. That makes any C6 capable of operating almost any spa, anywhere in the world, right out of the box!

We have a Topside Extension Plate available if you are replacing a larger topside then the T7. Be sure to order a 1/4" Thermowell/Bushing (dry sensor well/housing) if the spa you are installing the control into doesn't already have one installed. (Available as an option above)